Shipping FREE on all orders over £75 - 
| Size of your hot tub | 1 pack of Aquafinesse will last approximately... |
| Less than 1000 litres / 220 gallons | 6 month |
| 1000 - 1250 / 275 gallons | 5 months |
| 1250 - 1500 / 330 gallons | 4 months |
| 1500 - 2000 / 440 gallons | 2 1/2 to 3 months |
Simple Weekly Treatment.
- Shake the bottle of AquaFinesse to release the patented formal and add a measured amount directly to your spa water, turn on your jets for a few minutes to mix.
- Add a fresh sanitising tablet to the dispenser and place on the filter tray
- Clean filters. Its as simple as that!
Fi-Clor Spa Anti Foam
Fi-Clor Spa Non-Chlorine Shock Recommended to be used with Aquafinesse as a weekly shock dose or if water begins to appear cloudy.
Fi-Clor Spa Anti-Scale
Fi-Clor Spa Chlorine Tablets as a top up to the supplied tablets if needed.
Fi-Clor Spa Oxy-Brite Spa A good shock dose if water is cloudy after a large party/bather load.
Switching over to AquaFinesse.
We recommend that your spa is first thoroughly cleaned of old biofilm, calcium and grime (which often nestles unseen in the pipe work) by using our Spa Clean product. The water should then be drained and refilled; you are now ready for the unique bathing experience that only AquaFinesse can offer.
Starting up a new spa.
During the manufacturing process spas are filled with water and tested. As this is generally done on a production line system the water can contain dust and debris from other spas and the factory itself, up to one litre of this water can remain in the pipe work of your spa after draining, allowing biofilm to grow.
For this reason all new spas should be treated with a chlorine shock once installed.
You can start using AquaFinesse in you new spa 4-6 hours after the chlorine shock has taken place. In the first few weeks it is not uncommon to see slightly cloudy water this is a natural process as AquaFinesse does its job and begins to break down the biofilm from the walls and pipe work. During this period please ensure that your filters are washed regularly. Once this purging or cleaning period is over your water will be crystal clear.
We do find that most customers choose not to go through the purging period by simply using an AquaFinesse product called 'Spa Clean. This is a 'one off' environmentally friendly treatment which cleans your spa thoroughly from the inside out.
Note on testing:
Under normal circumstances the pH and Alkalinity of your water will not need adjusting as AquaFinesse contains a natural balancing agent however, strip testing is advised as certain geographical areas experience extreme high or low calcium levels in the water. If you find that your water levels need to be adjusted this can be done simply and will not interfere with the workings of AquaFinesse, please ask your dealer for advice.