Pooltest 3 Photometer with soft carry case.
Regular testing of pool water is essential for effective disinfection and pH control to ensure bather safety and comfort. The Palintest Pooltest 3 offers the ideal answer - a 3 parameter instrument which is quick, accurate and reliable. Using the meter could not be simpler. First select the test parameter you wish to determine using the ‘Menu’ button. Place the sample plus test reagents in the tube, place in the meter and press the ‘ON’ button. The result is displayed instantaneously.
The meter has automatic blank recognition and zero setting. The use of innovative micro-power design means that approximately 20,000 readings can be taken before battery replacement will be required. Palintest also offer certified Check Certificates as an optional extra. The Pooltest 3 Check Standards allow you to comply with your quality procedures.
Contains 20 tests for Free and Total Chlorine, 20 tests for pH, 10 tests for Cyanuric Acid and 2 photometer test tubes.
Pulsed LED
2 button
Optionally held in memory or reset for each reading
Factory set 5 point calibration. Recalibration through internal software
Splash proof case with membrane keypad - Chlorine 0 – 5 mg/l
PH 6.80 – 8.40
Cyanuric Acid 0 – 100 mg/l
0 to 50 °C
2 x 1.5v batteries (included) Power management system with auto-switch off
Approx. 20,000 readings
Pocked-sized – instrument only 173 x 75 x 44 mm
|
