LX Chinese Straight Style 3KW heater

This is a straight chinese heater, typically has a H30-R1 reference number, this replaces the old style rooster heater, be aware the unit must be set by a pressurised pressure switch,  as if there is no back pressure it may not work. Pressure switch built into the heater run on a separate cord.


Complete Length: 340mm
Heater Diameter: 50 mm
Height 120 mm

KW: 3.0 
Amps: 13.6
Volts: 230
Hz: 50

These are used primarily for Chinese spas where you may require a plumbing change or as a remote heater on a project

This heater is slightly longer than the Old Rooster type so you will need to alter the plumbing.

The unit has a high limit thermal cut out built in.