A PCB transformer for the Vita Spa L200
This a Balboa Systems specific 12 pin transformer.
This is a selection of Fuse Holder Blocks
This relay is used as a replacement in the Softtub series of hot tub - it is only sold as a pair.
Balboa Heater copper straps - Set of 2, with bolts. Brass bracket fastens circuit board to heater terminals.
Logic Jumper for all Sundance Spas Circuit Boards
A Ballast Assembly specific for Dimension One Spas 1999 to Current used with Gecko equipment.
A MSPA-MP-NE Transformer - used on Dimension One spas (mid 2001 to current) Reflections Series and Bay Collection
These Buss fuses come in 20 amp / 25 amp & 30 amp ratings.
These are a selection of hot tub specific fuses that Balboa has to offer - including 1/2, 3, 10, & 20 amp fuses
These are a selection of hot tub specific fuses that Gecko has to offer - including 2, 3 & 5 amp fuses
3 core cable with a 4 pin amp connector used for blowers, ozonators and single speed pumps. Components connect direct to the PCB motherboard.
4 core cable with a 4 pin amp connector used for two speed pumps. Components connect direct to the PCB motherboard.
2 core cable with a 2 pin amp connector and light bulb holder used specifically for hot tub lighting.
2 core cable with a 2 pin JJ connector and light bulb holder used specifically for hot tub lighting.
4 core cable with a 4 pin JJ plug used for two speed pumps. Components connect direct to the side of control system box.
9920-400178 - Gecko cable and light socket 8' S-MSPA-1-4-TSPA
A 3ft / 10ft and 25ft extension cable for Balboa 8 pin Deluxe and Serial Standard topside control panels - when you need a bit more extra length
A 25ft topside panel extension cord for the ML range of touch panels
Gecko Dual Auxiliary for 12C (com cable) - see below for spa specifics
This is a amp plug to J&J plug adapator - used for 1 Speed Pumps or Blowers - ensure you match the pin configuration.
AMP Plug: Mate-N-Lock 3 PIN White
AMP Plug: Mate-N-Lock 2 PIN White
AMP Plug: Mate-N-Lock 4 PIN White