Fi-Clor Pool Non-Chlorine Shock 5Kg

• Safety Data Sheet

Fi-Clor Non Chlorine can be used to shock dose pools which use all types of chlorine as a sanitiser without boosting chlorine levels. it may also be used for reactivating spent bromine in bromine treated pools. It dissolves rapidly to break down unpleasent pollutants and organic matter, and is effective over a wide range of water conditions and pH values. It is an ideal shock treatment for pools with automatic pool covers. 5kg.

• Breaks down pollutants in pool water
• Restores sparkle to cloudy water
• Shock doses without raising chlorine
• Ideal for pools with automatic covers

1. The product can be dosed directly into the pool without pre-dissolving. It should always be used when bathing has ceased. For outdoor use, avoid facing the wind when dosing.
2. Calculate the volume of water in your pool (if in doubt, consult the Fi-Clor Swimming Pool Handbook). To shock dose, the rate is 750g of Non-Chlorine Shock to 50m³ (11,000 gallons) of water. To treat green or cloudy water, add 1kg to 50m³ (11,000 gallons).
3. Treat immediately at the onset of green or cloudy water. [Note: Where algae infestation is at an advanced stage, you are recommended to use Fi-Clor Superfast Shock].
4. Dose into an area of the pool where there is good water circulation.