Shipping FREE on all orders over £75 - 
Fi-Clor Anti foam enables you to deal with foaming on the surface of the water often caused by a build up of soaps, shampoos, detergents or skin treatment products. 1 Litre.
- Only use when bathing has ceased.
- With the circulation running apply fi-clor Anti-Foam at a rate of approximately 20ml to 1 square metre of the spa water surface area after diluting at a ratio of 1 part product to 2 parts tap water. Repeat if necessary according to the severity of the problem. Improvement should be noticed shortly after application.
- Anti-Foam can be applied at regular intervals after filling to help prevent foaming.
- Excessive foaming is usually caused by an underlying problem. Everything should be done to resolve this problem as otherwise the spa will always foam.