|
Nothing is more important for hot tub water quality than your filtering system. A dirty and clogged or worn-out filter will fail in its job of trapping contaminants, and put strain on your spa's pump. Clean your filters every couple of weeks and soak clean them every 6 weeks and replace them annually.
Use the filter rotation method: while cleaning your dirty filter, swap it with a clean dry spare. With this system you'll never have to wait to use your spa, and your filters will last longer. Allowing filters to dry completely after cleaning will help destroy any resident micro-organisms.
Hot tub filter cartridges should be rinsed every two weeks (more often when the bather load is heavy). Use a garden hose, and apply the water stream at a 45-degree angle, making sure to dislodge all foreign matter by spraying between each pleat. Or try our new Filter Cleaning Wand.
Water Wand Makes it easy!
At least every 6 to 8 weeks, and with EVERY water change, your cartridge should first be pre-rinsed with the garden hose, then soaked overnight (or according to package instructions) in a non-foaming filter cleaning compound such as FilterBrite or Cartridge Cleaner. Then rinsed again and allowed to dry out.
Avoid laundry detergents and household cleaners - you may have a major foaming problem with your hot tub if you use them.
1. Use a product designed for cleaning pleated filter cartridges.
2. When cleaning, always rotate out your filters with a clean, dry spare.
3. We recommend that filters be replaced annually.
4. Never use a power-washer or dishwasher to clean filter cartridges. The high water pressure will damage the media.
|
