Contact  |  Delivery  |  Terms  |  Help Section
The Genesis blower is well recognised in whirlpool, bath and spa industry,due to its extensive range it is important to understand the features that the individual models provide:
Genesis Models

 

 

Features

NN - Standard blower for electronic control/touch pad.

AN - Pneumatic air switch
Pneumatic on/off blower

HN - Heater
Standard blower for electronic control/touch pad with built-in heating element to reduce cold air in upstart.

AH - Pneumatic air switch & heater
Pneumatic on/off blower with built-in heating to reduce cold air in upstart.

VN* - Variable speed
Standard blower including variable massage mode and automatic dry-out when using special touch pad UK01658A connected directly to blower. No seperate control panel needed. See functional description under “VH”.

VH* - Variable speed & heater
Standard blower including variable massage mode and automatic dry-out when using special touch pad UK01658A connected directly to blower. No seperate control panel needed. The blower has built-in heating element to reduce cold air in upstart. Functional description for preset programme:

- Press the on/off button = high speed.
- Press the +/- button = in-/decrease blower speed.
- Press the ~ button = massage mode “pulsating effect”

Automatic stop: blower stops 30 min. after the user has operated one of the buttons for the last time.

Drying cycle: 30 min. after manual or auto switch off, the blower starts up at high speed for 2 secs. It then drops to low speed and increases gradually to high speed within 30 sec. The blower will then continue running 4½ min. at high speed to drain remaining water from the pipes.

ANT* - Pneumatic air switch & 3-speed
Pneumatic on/off blower including massage mode, automatic dry-out when using standard pneumatic air switch. See functional description under “AHT”.

AHT* - Pneumatic air switch, 3-speed & heater
Pneumatic on/off blower including massage mode, automatic dry-out when using standard pneumatic air switch. With built-in heating element to reduce cold air in upstart. Functional description for preset programme:

1. Press the pneumatic button = high speed.
2. Press the pneumatic button = medium speed.
3. Press the pneumatic button = low speed.
4. Press the pneumatic button = massage mode “pulsating effect”.
5. Press the pneumatic button = off.

Automatic stop: blower stops 30 min. after the user has operated one of the buttons for the last time. Drying cycle: 30 min. after manual or auto switch off, the blower starts up at high speed for 2 secs. It then drops to low speed and increases gradually to high speed within 30 sec. The blower will then continue running 4½ min. at high speed to drain remaining water from the pipes.

* The preset programme can be changed via jumpers inside the blower to change order of functions or to eliminate
the drying cycle. Request manual for detailed information.


Performance Curves