Shipping FREE on all orders over £75 - 
A hugely popular heater for Hotsprings, this unit is a revision of the types shown below - its name reflects the fact that poor water chemistry maintenance would no longer be a cause to void the heater warranty, if your unit is the trombone type below without a pressure switch then this is the unit for you. *note the last photo in the gallery, if this looks like your heater with a external pressure switch cable then do not buy this unit.
Stainless length: 270mm
Overall length: 412mm
KW: 1.5
Amps: 6
Volts: 230
Hz: 50
The above Hot Spring heater is the all new Laing replacement for the Paper-clip / Trombone (Laing Tri-Bend heater #6759) style heater- pictured below.
This new heater is the replacement and is Identical to previous heater with ref. numbers WAT73790 / 6759 / 7211 / 9330-51 / 73790 / 72797,
It also replaces the Hotspring heater with the old 4 Streamlined double-pass design.
It has a manual reset hi-limit and threaded holes for the sensors which are not supplied with the heater as sensors do not operate the heater, the PCB does. It has an Incoloy heater element. 3/4" Vinyl tubing connects onto the heating tube.
If you have any problems or enquiries please ring us on 0844 800 3290 for assistance.
Stainless length: 270mm
Overall length: 412mm
KW: 1.5
Amps: 6
Volts: 230
Hz: 50
The above Hot Spring heater is the all new Laing replacement for the Paper-clip / Trombone (Laing Tri-Bend heater #6759) style heater- pictured below.
This new heater is the replacement and is Identical to previous heater with ref. numbers WAT73790 / 6759 / 7211 / 9330-51 / 73790 / 72797,
It also replaces the Hotspring heater with the old 4 Streamlined double-pass design.
It has a manual reset hi-limit and threaded holes for the sensors which are not supplied with the heater as sensors do not operate the heater, the PCB does. It has an Incoloy heater element. 3/4" Vinyl tubing connects onto the heating tube.
If you have any problems or enquiries please ring us on 0844 800 3290 for assistance.