Helps prevent an airlock when refilling the spa. Remove before draining & re-insert after the circulation pump and jets are working properly after adding new water. Includes O-Ring.
Click image to enlarge
E-Z Lock Repair Plate - 01561-24
If the tabs at the bottom of your filter cannister, (all spas using 01561-00 filter), have broken you'll need this plate. Sand the old tabs flat, apply lots of silicone to the bottom of plate & mount over old tabs. Let cure 48 hours.
Click image to enlarge
Grey Filter Cap - 01510-408G
Mounts over UltraPure Ozone filter on 1998 - current spas.
Click image to enlarge
White Filter Cap - 01510-408
Mounts over UltraPure Ozone filter on 1998 - current spas.
Click image to enlarge (White no longer available)
Grey Basket Assembly - 01510-137G
This Grey 3-piece Weir Basket Assembly is located over the high-speed filter. Traps leaves and other large debris before they can enter the filter area. (Available only as a complete set in grey / white no longer available)
Click image to enlarge
Filter Cover - Silver - 01510-102
Used on D1 @ Home Spas
Click image to enlarge
Large Filter Cover - Silver - 01510-112
EZ lock filter screen -
01510-501
Used with the 01561-00 filter, this screen helps prevent large debris from entering the spa’s plumbing or clogging the circulation pump. It’s “Twist-Lock” design also holds the filter firmly in place for good filtration. Replace if cracked or broken to prevent clogging of your circulation pump.
What's New 
