Spaform Main | Spaform Heaters / Blowers / Sensors / Ozonators
Balboa Heater 240v 15"x 2" 8251N (58061) (58063)
Balboa Heater 240V 15" x 2" (50139) (50145)
2psi 30408 Balboa Pressure switch
30 Amp Buss Fuse.
25 Amp Buss Fuse.
20 Amp Buss Fuse.
Balboa Sensor Assembly
This is a Sensor assembly for Balboa systems, mainly older pressure switch systems. It has a single connector to the circuit board with two sensors, the larger temperature 3/8 sensor goes into the spa and the smaller 1/4" high limit sensor goes into the heater back. For your identification the cable label reads: S/N 30337 SENSOR ASSY 96" (3/8, 31" (1/4)
£
Balboa Hi Limit sensor
This is a balboa Hi Limit sensor for Balboa systems. S/N 30298 SENSOR 31 inches length (Diameter. 1/4inches)
Balboa Temp sensor
Temperature Sensor, 96", 3/8" Diam (2-Pin Connect) - Balboa 30294
Balboa Heater M7 Sensor (most common in UK) This is a single M7 heater Sensor. There are two Balboa M7 system heater sensors located at each end of your heater and are identical to each other. The length from the tip of the sensor to plug end is 24”- this comes as a kit complete (32016) includes washer & o-ring £
Genesis Blower. Genesis 900W Blower + heated (portable blower).
Balboa Spas Ozone
This replaces the old Spaform UV tube and is a direct replacement comes with all fittings.
What's New 
