Shipping FREE on all orders over £75 - 
Hot Tub Jet Body Assembly with 3/8 barb for air & 3/4" barb for water - this assembly suits both a Pentair 3 inch and 3 1/3" jets.
Please note these bodies are supplied with the floating compensation ring, situated between the front face and the location nut - (normally with Dimension One Hot tubs) - this is shown in the photo gallery - however with Arctic spas this is not required - please remove prior to installation.
Height: 95 mm (approx. standing on face)
Front Face Diameter: 69 mm
Old Arctic and Dimension One hot tubs
Please note these bodies are supplied with the floating compensation ring, situated between the front face and the location nut - (normally with Dimension One Hot tubs) - this is shown in the photo gallery - however with Arctic spas this is not required - please remove prior to installation.
Height: 95 mm (approx. standing on face)
Front Face Diameter: 69 mm
Old Arctic and Dimension One hot tubs