Shipping FREE on all orders over £75 - 
This is a complete heater assembly for a Saratoga Spas with 2 heater elements, a 2Kw and a 1Kw, this configuration saves you energy and therefore money by using both elements only when the demand is required.
A previous code for this heater made by Aquatemp was: 20-00542, the new heater has the code E2300-0542ET. Please be aware this heater does not fit any other spa.
It is supplied with both the top and bottom plastic connections and seals.
Length: 330mm
Diameter: 74mm (inner)
Distance Between terminals: 33mm (each)
Complete length (inc. uniona): 450mm
KW: 3.0 (2 + 1)
Amps: 11.5-12.0
Volts: 230
Hz: 50
This Saratoga heater is vertically fitted (via short bolts) to the side of its Balboa Control Box. You will need to reconnect the hi-limit sensor & pressure switch upon installation.
A previous code for this heater made by Aquatemp was: 20-00542, the new heater has the code E2300-0542ET. Please be aware this heater does not fit any other spa.
It is supplied with both the top and bottom plastic connections and seals.
Length: 330mm
Diameter: 74mm (inner)
Distance Between terminals: 33mm (each)
Complete length (inc. uniona): 450mm
KW: 3.0 (2 + 1)
Amps: 11.5-12.0
Volts: 230
Hz: 50
This Saratoga heater is vertically fitted (via short bolts) to the side of its Balboa Control Box. You will need to reconnect the hi-limit sensor & pressure switch upon installation.