Skip to main content

Aquastic Fastcure Epoxy Putty

Sku: 3339

120g Epoxy putty (for underwater and tiles)

£18.17
Currently awaiting stock. More expected imminently
MPN: AQSTICK

Aquastic Fast Cure Epoxy Putty 120g. Aquastik is a hand knead able, speciality epoxy putty that mixes in one minute to provide permanent repairs to damp, wet areas and underwater applications. It may be applied in either fresh or salt water, and will bond tenaciously to substrates such as fibreglass, metal, wood, concrete, ceramics, glass etc.

In immersed applications, Aquastiks cure rate is dependant upon the temperature of the water just as it is affected by the air temperature in non-immersed applications. The lower the temperature the longer it takes to cure.

Aquastik comes in a handy rod form with the curing agent encapsulated in the contrasting colour base material. Its putty like consistency eliminates drips and runs providing ‘no mess’ applications with no tools required for use. Aquastik has 100% solids content, will not shrink and is water-soluble.
The mixed epoxy turns from an aquamarine colour or ‘fibreglass white’ upon curing and will not yellow upon exposure to UV.
After final cure, Aquastik may be drilled, sawed, tapped, filed, sanded and painted. It allows patching in areas where welding is impossible.
The Aquastik is limited only to your imagination – it has a million uses. Aquastik is a hand knead able, speciality Epoxy Putty that mixes in one minute to provide permanent repairs to damp, wet areas and underwater applications.
It may be applied in either fresh or salt water, and will bond tenaciously to substrates such as:

  • Fibreglass
  • Metal
  • Wood
  • Concrete
  • Ceramics
  • Glass

Aquastik comes in a handy rod form with the curing agent encapsulated in the contrasting colour base material. Its putty like consistency eliminates drips and runs providing 'no mess' applications with no tools required for use.
Aquastik has 100% solids content, will not shrink and is water-soluble. The mixed epoxy turns from an aquamarine colour or 'fibreglass white' upon curing and will not yellow upon exposure to UV.

Instructions

  • After proper mixing, Aquastik moulds like clay and may be used to permanently patch dents, scratches, cuts, gouges and holes in fibreglass, metal and wood.
  • After five to ten minutes, the epoxy will harden like metal and start to form a tenacious bond.
  • After just forty-five minutes, Aquastik is completely cured and it can be drilled, sawed, carved, sanded or painted.
  • The unused portion of Aquastik will remain stable for years if protected from direct contact with air.

Ideal For

  • Caravan Repairs (fibreglass)
  • Boat & Yacht Repairs (decks & hulls)
  • Car & Van Repairs (car body, battery tray)
  • Crafts, Hobbies & Modelling,
  • Swimming Pools (concrete cracks, coping stone adhesive & repair. )
  • Mosaic & Concrete Tile Repairs
  • Concrete Floor Repairs (chipped floors, steps)
  • Interior & Exterior Pipe & Fittings Repairs
  • Hot Tub & Spa Repairs
  • Roofing Repairs (tiles)
  • Motor Repairs (fuel tanks, battery cases)
  • Waterproofing (electrical connections)
  • Leaking Gaskets
  • Forming Custom Gaskets
  • Storage Tanks (water tanks)
  • Aquarium Repairs (water tanks, fish boxes)
  • Bathroom Repairs (sinks, baths)
  • Plastic Outdoor Furniture Repairs (excluding Polypropylene & Polyethylene)
  • Interior & Exterior Wooden Furniture Repairs (remoulding doors, knobs, scratches, gouges)
  • Garden Fencing Repairs (wood, metal)
  • Leaded Window & Glass Repairs (bonds glass into framework)
  • Aquastik is a powerful adhesive which bonds together many materials.
  • Aquastik is ideal for making emergency in-water & underwater repairs.
  • Aquastik allows patching in areas where welding is impossible.
  • In immersed applications, Aquastiks cure rate is dependant upon the temperature of the water just as it is affected by the air temperature in non-immersed
  • The lower the temperature the longer it takes to cure
  • Weight - 130 grams per stick.
Bubbletubs Ltd
Unit 9 Wombourne Enterprise Park
Bridgnorth Road
Wombourne
Wolverhampton
WV5 0AL

Phone: 01902 893 803
info@poolandspacentre.co.uk
VAT: 834 2050 60
Registered: 4995297