Gecko Arctic Spa Metapak PCB
An Arctic Spas PCB for all spas with a Gecko metapak system from 2003-2007 / series 3000-8000
Please always ring prior to ordering.
To set parameters, hold the filter key until BL is shown, the options are
P2 pump 2
P3 pump 3
CP circ pump
0 is off and 1 means the device is installed.
Next three should be set to 0
FC filter cycle cut off setting
CC cooling device setting
CF clean filter reminder (comes on every 3 months regardless of filter
condition or age)
An alternative PCB to the Metapak would be the MSPA-MP-NE-GE1-CE Gecko PCB. This is compatible with existing Arctic Spas topside controls. Please note that if you do go for the alternative option you will also require the longer Gecko Hi limit probe - 9920-400446.
This hot tub circuit board must only be fitted to the hot tub control system specified, it should be fitted by a competent individual as all our boards are tested prior to sending out, so we recommend you read our easy to understand PCB installation notes in our troubleshooting section.
Circuit boards and other computerised equipment are exempt from our returns policy if they have been opened or installed.
If the board is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.