Boxer Vinyl Pool Repair Kit
Associated Documents
Please swipe left on the below table to add products to the basket if using a mobile device.
No need to empty your pool...mends under water! The Boxer Adhesives Vinyl Repair Kit.
Instructions
- All surfaces must be clean. Cut round corners on patch. For inflatables and light gauge vinyls, apply adhesive to patch sparingly and press tightly to surface to be repaired. Allow to dry for 24 hours.
- A face mask or underwater goggles should always be used when going underwater to make repairs.
- For deep underwater repairs, cut round corners on patch. Apply adhesive to patch and fold patch over upon itself. When you reach the damaged area under water unfold patch and apply immediately to liner, squeezing out all water bubbles. Do not disturb patch for at least 48 hours. Allow 4-7 days for a full cure.
- For quick and easy vinyl repairs without liquid adhesive, use Boxer Vinyl Plastic Pool Patches. This is a clear tape where you peel off the paper backing and apply immediately. Vinyl Plastic Pool Patches are excellent for other applications such as vinyl upholstery and waterbeds. Patch sizes: Small 3"x 3", Large 3"x 7". 5 in each pack.