Skip to main content

Fi-Clor Spa Anti Foam

Sku: 6

Fi-Clor Spa Anti Foam

£18.44
There are currently 45 in stock
MPN: FISAF/6

Fi-Clor Anti foam enables you to deal with foaming on the surface of the water often caused by a build up of soaps, shampoos, detergents or skin treatment products. 1 Litre.

Instructions

  1. Only use when bathing has ceased.
  2. With the circulation running apply fi-clor Anti-Foam at a rate of approximately 20ml to 1 square metre of the spa water surface area after diluting at a ratio of 1 part product to 2 parts tap water. Repeat if necessary according to the severity of the problem. Improvement should be noticed shortly after application.
  3. Anti-Foam can be applied at regular intervals after filling to help prevent foaming.
  4. Excessive foaming is usually caused by an underlying problem. Everything should be done to resolve this problem as otherwise the spa will always foam.
Bubbletubs Ltd
Unit 2 New Barns Farm
Hilton
BRIDGNORTH
WV15 5PB

Phone: 01902 893 803
VAT: 834 2050 60
Registered: 4995297