Skip to main content

Spa Fix A Leak

  Sku MPN Item Price Stock Add to cart
Spa Fix A Leak - 32oz 875 8-05-0073 Spa Fix A Leak - 32oz £36.70 77 in stock
Spa Fix A Leak - 8oz 26184 8-05-0061 Spa Fix A Leak - 8oz £13.08 115 in stock

FIX A LEAK is a blended, concentrated material designed to seal leaks in virtually any material. FIX A LEAK can be used to fix pool and spa plumbing leaks, pool leaks and spa leaks. It will seal holes up to 3mm in diameter and form a permanent seal.

This product is best used in fully foamed or a pre-built wooden hot tubs. Use 8 oz per 1,000 gallons for leaks in hot tubs. Use 32 oz (910 ml) for pools up to 18,000 gallons. Two treatments are required for large leaks. Leaking pools, plumbing and pool liners can all be fixed with Fix-A-Leak!!

Features

  • It is a concentrated blended material.
  • Seals leaks in virtually any material.
  • It works well in the plumbing system.
  • Seals holes up to 3mm in diameter.
  • A long-lasting seal is formed.
  • Spas only require 4 oz for 250 gallons.
  • It will not harm salt chlorine generators, heaters, pumps or filters

Instructions

*Shake Well Before Using*

For Spas:

  • Bypass Filter before adding FIX-A-LEAK to water.
  • With pump running add FIX-A-LEAK slowly through skimmer or in front of any other suction intake.
  • FIX-A-LEAK is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension every 4-6 hrs. during circulation of water.
  • Continue to recirculate water until the leak has stopped.
  • After the leak has stopped, give it the proper time to cure (24-48 hrs.). You may then return to normal filtration.
  • Treatment can be repeated if necessary.
  • Once you determine the leak has stopped, drain your tub. Properly wipe down the spa with a wet cloth, nothing abrasive. Allow to dry for 4-5 days to all FIX A LEAK to properly cure.

For Swimming Pools

  • Bypass FILTER MEDIA before adding FIX-A-LEAK to water. Sand filters: set filter valve to recirculate. Other types: remove cartridges DE elements from filter tank. Then proceed to circulate through empty tank.
  • With pump running, add FIX-A-LEAK slowly through skimmer or in front of any other suction intake.
  • After adding FIX-A-LEAK adjust suction to main drain. If this is not possible, the vacuum cleaner could be used alternatively, simply by placing the vacuum in deepest part of pool and connect to normal vacuum connection. Set filter valve to normal vacuum position.
  • FIX-A-LEAK is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension, either manually using a pool broom or mechnically with a automated pool cleaner every 4-6 hrs. during circulation of water.
  • Continue to recirculate water until the leak has stopped.
  • Mark level of water in pool and check for 2-3 days to determine if the leak has stopped.
  • After the leak has stopped and given the proper time to cure (24-48 hrs.) you may return to normal filtration. Sand Filters: Set filter valve to filter and resume normal operation. Backwash out unused FIX-A-LEAK as required. Other Types: Reinstall filter into tank and resume operation. Rinse out unsed FIX-A-LEAK from filter as required.
  • *NOTE* Never let cartridges of DE elements be left to dry before they are cleaned.
  • Treatment can be repeated if necessary.
Bubbletubs Ltd
Unit 9 Wombourne Enterprise Park
Bridgnorth Road
Wombourne
Wolverhampton
WV5 0AL

Phone: 01902 893 803
info@poolandspacentre.co.uk
VAT: 834 2050 60
Registered: 4995297