Spaform SF100 Touch Panels

The Spaform SF100 is the most common of Balboa topside controllers in the UK, due to the fact is is used in the Spaform systems, it is part of Balboa's VL standard range & comes complete with a telephone cord style connector.

For identification the rear panel may have the s/n 54112-01 on a label.

Width: 188mm (7.4")
Height: 84mm (3.3")

Button Configuration

Below you will see a few options - the only difference is how the buttons are laid out - check and select your configuration

7 button 2p & air - jets 1 + jets 2 + light + blower + mode + warm + cool
6 Button 1 pump & air - jets + blower + light + mode + warm + cool
7 Button 2 pump / aux - aux + mode + warm + jets 1 + jets 2 + light + cool
6 Button 1 pump / air - jets + blower + light + mode + warm + cool
6 Button 2 pump - jets 1 + jets 2 + light + mode + warm + cool
5 Button 1 pump - jets + light + mode + warm + cool

This spa topside fits the Spaform SF100 range of tubs, it also is compatible with the .GS501SZ, 510S, 510SZ, 511SZ series, it also fits , 2005 LE, M3TUV. , Hydropool, Canadian Spa, Beechcoomber, Catalina, Aegean & Hot Tubs Direct.

We have produced a generic step by step guide for fitting your new topside here

Due to the vast array of sealants in the marketplace we only recommend using Silcoset Silicone Sealant - the industry leader

Please note, the size and configuration we send you will be as per the photograph, but sometimes the overlay design and colour may vary, this has no bearing on functionality & installation