SKU

Waterway 48 frame 1.5"Centre Discharge - (1 Sp - 2hp)

Grouped product items
Product Name	SKU	MPN	Price	Qty	Stock
Waterway Centre Discharge Wet Ends - 1.5 inch - 2 hp	Waterway Centre Discharge Wet Ends - 1.5 inch - 2 hp	605	310-1141	£78.96 £65.80	- +	2 In stock
Pump Motor Only- 2hp - 1 speed - 48 Frame	Pump Motor Only- 2hp - 1 speed - 48 Frame	637	MEC80-1HiFlo	£195.89 £163.24	- +	2 In stock
Waterway Wet End Screws - 48 Frame	Waterway Wet End Screws - 48 Frame	11020	819-0501	£2.44 £2.03	- +	72 In stock

Add to Wishlist

In-stock orders dispatched:14:00

Free Delivery (UK Mainland)

Why choose us?

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Overview

Please note this pump comes disassembled and requires 5 minutes and a spanner to put together

This is our best selling 48 frame pump, we are a primary distributer for Waterway in the UK and all the options here have a 1.5 inch (inlet) x 1.5 inch (outlet).

The actual measurement over the threads of the inlet and outlet is approx 61mm

These European spec. motor (EMG) are recommended by Waterway for the European market, there are both single and two speed variants available in either 1.5hp or 2hp power outages

They have a rear fan and a finned body design to dissipate heat and give lower running temperatures.

Not sure which pump you need?

Below is a breakdown of what to check. First will be AMPs and RPMs.

If there is only one rating then it will be a single speed, if there is two, you guessed it ... two speed.
AMP ratings will typically be 5 – 7 amps = 1.5 (HP), 7–9 amps = 2.0 (HP), 9–11 amps = 2.5 (HP), 11–12 amps = 3.0(HP) & 14–15 amps = 4.0 (HP)
RPM rating will normally be 1450 for low speed and 2900 for high speed.

Next, check the outside diameter's of the threads for your pipe connections.

Most wet ends can be rotated to 3, 9 and 12 o'clock so no need to worry about that.

It is worth checking overall dimensions of the pump before ordering to ensure you have enough space for the new pump.

Now you have all the information to look through our Jet Pump Range!

Dimensions

	1 Speed
Length:	370 mm
Height:	200 mm
Width:	175 mm

Specifications

	2HP - Single Speed
Amps:	6
Volts:	230
Hz:	50
Motor KW:	1.4
HP:	1.5
Impellor:	2hp (310-5200)
RPM:	2820
Capacitor:	25uf
Fittings:	1.5 x 1.5 inch

Additional Info

The pumps are supplied without a cable, as the power cord is dedicated to your model of control system, therefore you will need to rewire your existing cable to the pump. Remove the cord from your old pump, and note, the wire colour going to high speed or low speed terminals on any motor, the colour is set or determined by the maker of the spa control, not by the pump or motor manufacturer.

Before you remove the power cord from your old pump, look at the old motor wiring label and make a note of what color goes to high, and to low. Then, put the cord on your new motor/pump, using the same color for high as on the old motor and also for low speed wiring.

Please note if your pump is the red one shown in the photo above then this is the option for you - just pick whether it is 1 or 2 speed - the horse is dependant on the amp draw.

If you need help with anything please see Hot Tub Pump Identification

Compatibility