SKU

Waterway 48 Frame 2" Side Discharge / 2hp / 2 Spd Pump

Grouped product items
Product Name	SKU	MPN	Price	Qty	Stock
Pump Motor Only - 2hp - 2 speed - 48 Frame	Pump Motor Only - 2hp - 2 speed - 48 Frame	638	MEC80-2HiFlo	£222.23 £185.19	- +	Available for Back Order
Waterway Wet End Screws - 48 Frame	Waterway Wet End Screws - 48 Frame	11020	819-0501	£2.44 £2.03	- +	72 In stock
Waterway Executive 48 Frame Wet Ends - 2 inch - 3 hp	Waterway Executive 48 Frame Wet Ends - 2 inch - 3 hp	589	310-1910-SL	£80.90 £67.42	- +	2 In stock

Add to Wishlist

In-stock orders dispatched:14:00

Free Delivery (UK Mainland)

Why choose us?

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Overview

These are 48 frame Executive 48 frame side discharge pumps, this option has 2 inch (inlet) x 2 inch (outlet).

Please note: You will have to put this pump together, it takes five minutes and requires a spanner

This European spec. motor (EMG) is recommended by Waterway for the European market, It has a rear fan and a finned body design to dissipate heat.

This is the 2 speeds variant, the wet end is Part number 310-1910-SL.

Not sure which pump you need?

Below is a breakdown of what to check. First will be AMPs and RPMs.

If there is only one rating then it will be a single speed, if there is two, you guessed it ... two speed.
AMP ratings will typically be 5 – 7 amps = 1.5 (HP), 7–9 amps = 2.0 (HP), 9–11 amps = 2.5 (HP), 11–12 amps = 3.0(HP) & 14–15 amps = 4.0 (HP)
RPM rating will normally be 1450 for low speed and 2900 for high speed.

Next, check the outside diameter's of the threads for your pipe connections.

Most wet ends can be rotated to 3, 9 and 12 o'clock so no need to worry about that.

It is worth checking overall dimensions of the pump before ordering to ensure you have enough space for the new pump.

Now you have all the information to look through our Jet Pump Range!

Dimensions

	2 Speed
Length:	390 mm
Height:	235 mm
Width:	205 mm

Specifications

	2HP- Two Speed
Amps:	2.2(low) /6.8 (high)
Volts:	230
Hz:	50
Motor KW:	0.44 (low) /1.48 (high)
HP:	0.63 (low) / 2.11 (high)
Impellor:	1.5hp (310-0800)
RPM:	1440 (low) /2850 (high)
Capacitor:	16uf (low) /30uf (high)
Fittings:	2"x2"inch

Spare Parts

We have a complete list of spare parts available for the Waterway Executive 48 Frame Pump

Additional Info

The pumps are supplied dissassembled without a cable, as the power cord is dedicated to your model of the control system, therefore you will need to rewire your existing cable to the pump. Remove the cord from your old pump, and note, that the wire colour going to high-speed or low-speed terminals on any motor, the colour is set or determined by the maker of the spa control, not by the pump or motor manufacturer.

Before you remove the power cord from your old pump, look at the old motor wiring label and make a note of what colour goes to high, and too low. Then, put the cord on your new motor/pump, using the same colour for high as on the old motor and also for low-speed wiring.

Compatibility