Aquafinesse Water Care Kit for Spas

Switching over to Aquafinesse

We recommend that your spa is first thoroughly cleaned of old biofilm, calcium and grime (which often nestles unseen in the pipework) by using our Spa Clean Puck product. The water should then be drained and refilled; you are now ready for the unique bathing experience that only AquaFinesse can offer.

Starting up a new spa

During the manufacturing, process spas are filled with water and tested. As this is generally done on a production line system the water can contain dust and debris from other spas and the factory itself, up to one litre of this water can remain in the pipe work of your spa after draining, allowing biofilm to grow.

For this reason, all new spas should be treated with chlorine shock once installed.

You can start using AquaFinesse in your new spa 4-6 hours after the chlorine shock has taken place. In the first few weeks it is not uncommon to see slightly cloudy water this is a natural process as AquaFinesse does its job and begins to break down the biofilm from the walls and pipe work. During this period please ensure that your filters are washed regularly. Once this purging or cleaning period is over your water will be crystal clear.
We do find that most customers choose not to go through the purging period by simply using an AquaFinesse product called 'Spa Clean. This is a 'one-off' environmentally friendly treatment which cleans your spa thoroughly from the inside out.

Note on testing

Under normal circumstances, the pH and Alkalinity of your water will not need adjusting as AquaFinesse contains a natural balancing agent however, strip testing is advised as certain geographical areas experience extreme high or low calcium levels in the water. If you find that your water levels need to be adjusted this can be done simply and will not interfere with the workings of AquaFinesse, please ask your dealer for advice.