SKU
45598
SPAHTFLUSH1AS

AquaSPArkle Eco Flush

£13.50 £11.25
8 In stock
- +
Add to Wishlist

In-stock orders dispatched:14:00

AquaSPArkle Eco Flush has been formulated to help remove soap and oil deposits from hot tub and whirlpool bath plumbing.

Hot Tub Application Instructions

  1. Remove the cartridge filter(s) and ensure you have a residual disinfectant
  2. Level of 3 – 5mg/l (ppm).
  3. Add the required soe directly into the hot tub whilst the pump(s) are
  4. Turned on (with air controls closed) to assist product distribution.
  5. Allow to circulate for 1 hour, then drain the tub, rinse any residues to waste,
  6. Then refill with clean fresh water.

Hot Tub Dose Rates

Litres Gallons Dose Rate
1,000 220 250ml
1,500 330 375ml

 

Whirlpool Bath Application Instructions

  1. Fill bath with warm water ensuring all jets are submerged.
  2. Carefully add a small amount of domestic bleach (a capful) to the bath water and circulate.
  3. Add 150ml of AquaSPArkle Eco Flush to the water and circulate.
  4. Drain the bath, rinse residues off surfaces and refill with fresh water.
  5. Repeat monthly, or as and when required.
Icon Label Type Size Download
pdf AquaSparkle Eco Blue-Hot-Tub-Flush_UK_sds.pdf pdf 176.5 KB Download
pdf AS-Eco-Flush Technical Data Sheet.pdf pdf 335.9 KB Download
More from Aquasparkle
Need Help?