Blue Horizons Chlorine Reducer

Blue Horizons Chlorine Reducer can be used to lower Chlorine or Bromine levels in swimming pool water after shock treatment procedures or as a problem solver if the pool has been accidentally 'overdosed' with chlorine or bromine.

• Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean warm water.
• Stir well to ensure product is fully dissolved.
• Carefully add the resulting solution to the pool whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution.
• If applying after a shock treatment, allow a minimum of 8 hours for shock chlorination to oxidise bather wastes from water before application.
• Measure the free chlorine/total bromine level in the water, then using the dosing table below, calculate the total amount required.
• Split this amount into 4 smaller doses.
• Apply each smaller dose, allowing time to thoroughly circulate (2-3 hours for commercial pools/6-8 hours for domestic pools) before re-testing chlorine/bromine level and if necessary adding further doses.

Dose rates to lower Chlorine