Blue Horizons ClearFAST Aqua Sachet - 150ml

1. Ensure algae are pre-treated (previous 24hours) to release algae from walls prior to using ClearFAST Sachets. Adjust pH to desired range 7.2 – 7.6.
2. Backwash the filter (or clean the cartridge) and then return to the normal filtration setting prior to use.
3. Pour the sachet contents into the deepest part of the pool whilst the pump(s) are turned ‘on’ or alternatively for improved distribution pre-mix the product in 4.5 litre (1 gallon) of water and pour throughout the pool. Leave pumps ‘on’ for 6 – 8 hours after application.
4. After treatment-after heavy clarity problems it maybe necessary to remove the fine sediment formed on the pool floor via an automatic pool cleaner or in the case of heavier settlement manually vacuum with the filter set to waste.
5. After the sediment is removed set the filter to back wash until the waste water is clear, before resuming normal filtration.

Dose rates

Note: Dosage given as a guide for most effective use but may vary due to the level of turbidity.

Note: As Aqua Sachets cannot be re-sealed, the whole sachet must be used in one treatment.