SKU
13166

Blue Horizons Stain & Scale Inhibitor - 1L

£21.07 £17.56
4 In stock
Inhibitor is used if your swimming pool is in a hard water area (high calcium levels).
- +
Add to Wishlist

In-stock orders dispatched:14:00

Blue Horizons Stain & Scale Inhibitor is used If your swimming pool is in a hard water area, (high calcium levels) it may suffer from scale deposits on pool surfaces, pipework and heater elements. In certain situations metal staining (e.g. copper or iron) can also prevail. To prevent both of these problems, an application of Stain & Scale Inhibitor should be added directly to your pool water.

  1. Important: Before using this product, ensure that sanitiser levels are not greater than 3mg/l (ppm) for product effectiveness.
  2. Backwash the filter before application.
  3. Apply the product as close to the stain/scale as possible with the pool filtration system turned off.
  4. Brush the stain and scale daily for 5–7days following treatment.
  5. Repeat the treatment for large heavily stained areas, but do not exceed the dose of 3 litres per 45,450 litres (10,000 gallons) of pool water.

Dose rates

Water Volumes   Scale/Stain Prevention   Stain/Scale Removal
Litres Gallons Initial Dose Monthly top up  
4,545 1,000 100ml 50ml 100ml
11,360 2,500 250ml 125ml 250ml
22,725 5,000 500ml 250ml 500ml
45,450 10,000 1ltrs 500ml 1ltrs
68,175 15,000 1.5ltrs 750ml 1.5ltrs
Icon Label Type Size Download
pdf Stain & Scale Inhibitor - 1L pdf 46.1 KB Download
More from Blue Horizons
Need Help?