JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Call Us: 01746 330950
01746 330950Contact us on: 01746 330950
In-stock orders dispatched:14:00
Dryden Daisy
Prevent instead of killing!Dryden Daisy describes a system which prevents biological growth, instead of letting bacterial populations grow and then oxidising them with lots of chlorine afterwards.→ As a result the Chlorine demand decreases up to 80%.→ The less Chlorine is used, the less dangerous (volatile) disinfection by- products.
Daisy+ with DA-GEN
AFM-640 mmSpeck Badu Delta ECO VS 1.10 kW 230 VBesgo DN50/d63, FlowVis & air compressorDA-GEN 45-FC: pH dosing pump, 1 suction lance, free chlorine temperature,and pH-measurement with 1 APF® floculation pump and WI-FI
AFM-720 mmSpeck Badu Delta ECO VS 1.10 kW 230 VBesgo DN50/d63, FlowVis & air compressorDA-GEN 90-FC: pH dosing pump, 1 suction lance, free chlorine temperature,and pH-measurement with 1 APF® floculation pump and WI-FI
Daisy with Chlorine & pH Dosing
AFM-640 mmSpeck Badu Delta ECO VS 1.10 kW 230 VBesgo DN50/d63, FlowVis & air compressorDA-GEN Station: free chlorine, redox, temperature. and pH measurements1 suction lance, 3 dosing pumps (pH-, chlorine and APF®) and WI-FI.
AFM-720 mmSpeck Badu Delta ECO VS 1.10 kW 230 VBesgo DN50/d63, FlowVis & air compressorDA-GEN Station: free chlorine, redox, temperature. and pH measurements1 suction lance, 3 dosing pumps (pH-, chlorine and APF®) and WI-FI.
Dryden Daisy consists of three integrated steps:
Step 1. Filtration with the bio-resistant filter media AFM®:AFM stands for Activated Filter Media, a revolutionary filter media made from green and brown container glass, developed by marine biologist Dr. Howard Dryden. AFM® exceeds the performance of quartz and glass sand by filtering at least twice as efficiently. The catalytic properties on the surface of AFM® make it fully bio-resistant, which means no biofilm is formed in the filter bed. This reduces the chlorine demand and therefore the formation of harmful volatile disinfection by products such as THM's, cyanogen chloride and trichloramine. Not only the chlorine smell but also the risk of getting infected by pathogens like legionella or cryptosporidium, is greatly reduced. The pool is healthier, especially for children, safer for the environment and more economical.AFM® has been successfully used in over 500,000 public and private swimming pools worldwide.
Step 2. Best coagulation and flocculation with APF® and ZPM:AFM Grade 1 will remove practicals down to 4 microns (at a filtration speed of 20 m/h). When AFM® is combined with a ZPM static mixer using APF®(All Poly Floc), the nominal filtration will go down to 0.1 microns and much of the dissolved organic matter will also be removed. Dissolved organics such as urea, creatine and amino acids are responsible for up to 80% of the chlorine demand.Lower concentrations of organic matter mean lower chlorine demand and lower concentration of disinfection by-products (DBP's).
Step 3: Use the power of the sun with ACO®:ACO® acts as a catalyst and chlorine stabiliser in outdoor pools. With ACO®, the natural power of the sun is significantly increased and chlorine is protected from photo oxidation by the sun.
3 reasons for the DA-GEN:
1.Highly efficient electrodes: require very low conductivity: Only 1.0kg NaCl or 1.5kg MgCl2 is needed => low corrosion risk and high production of free radicals.2. Automatic measuring and controlling of free chlorine, pH and APF®: Guarantees crystal clear water and safe disinfection without chlorine smell.3. 24/7 full control with integrated Wi-Fi module.
Max file size: 2 Mb
Follow us on