Gecko IN.MIX Systems

Create stunning underwater color shows with the IN.MIX-300. This is an LED controller & power supply for your spa that provides the low voltage required to power the RGB LED lighting

When connected to one of Geckos X or Y series control systems for spas and hot tubs, IN.MIX-300 transforms the IN.K-1000 touch screen and IN.K-800 color display keypads in real lighting consoles with a perfect interface.

Create your personalized ambiance easily with an infinite selection of colors and a light intensity dimmer. It comes with a built-in power supply and can be connected to a 120V or 240V output of your spa’s control system. It can drive up to 100 points of RGB in 3 zones and illuminate the water of your spa or create accent colours around it.

Gecko IN.MIX-300-SL-AMP-V-GE1 (5V)

• A lighting control console at your fingertips
• Lights up to 3 different color zones in, or around your spa
• Built-in power supply
• Up to 100 points of RGB, LED light sold separately
• Additional CO connector
• Compatible with: in.k1000 version 14, in.k800 version 22 and in.touch 2
• Compatible with Y series version 2 (-V2)
• Compatible harness cable (1 per lighting zone) : 9920-401478

Gecko IN.MIX-300: IN.MIX-300-LU.ME-AMP-GE1

• A lighting control console at your fingertips

• Lights up to 3 different color zones in, or around your spa

• Built-in power supply

• Up to 120 points of RGB, LED light sold separately

• Additional CO connector

• Compatible with: in.k1000 version 14, in.k800 version 22 and in.touch 2

• Compatible with Y series version 2 (-V2)

• Compatible with Gecko IN.LU.ME Lights

Width: 179mm
Height: 156mm
Depth: 56mm

IN.MIX-300 with AMP power cord
Molex connectors
Available in 5 or 12 volts DC LED port

To prevent water from getting inside the device, the IN.MIX-300 should be installed on a vertical surface.