Kleenpool - 1L

• Maintain pH level within the ideal range of 7.2 - 7.6. If not in this range, adjust.
• Check the chlorine level and ensure it is established within the ideal range 1 - 3mg/l (ppm).
• Gradually pour the solution into the pool, whilst the pump(s) are turned 'on', preferably near the water inlets to aid distribution.
• After the initial dose this product should last for up to six months before further top-ups are required.
• Where used as a wintersing algaecide, carry out normal end of season closure procedures (e.g. removing debris and leaves) and ensure good distribution by circulating water whilst the pump(s) are turned 'on' for at least 2 hours.

Dosing Rates

General Precautions - Dosing

Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.

Handling/Storage:

Important
See hazards and precautionary statements opposite.

• Handle products in a well-ventilated area, preferably outdoors.
• Wash hands after use.
• Ensure lid is replaced and sealed after use. - Store in a cool, dry place.