How to identify your Multiport valve

Please remember that water and electricity are a deadly combination and do not mix. Use any of the information contained herein AT YOUR OWN RISK.

We will not be held liable for any injuries that may result from the troubleshooting advice or installation of any electrical components in your hot tub spa unit.

 

The easiest way to identify your multiport valve is to find a manufacturer's part code, this is normally found along the front face of the multiport valve. Once you have identified this number we can then use it and match it up to a valve that suits your pool's filtration system. It's important that the valve has the correct amount of ports and correct size inlets/outlets for your pool's pipework. We also have an extensive range of multiport parts

The size of your inlets and outlets can be found by measuring the diameter of the female fitting (most likely to be 1.5" or 2").

If your struggling to find a part number don't worry, the next step is to identify how many ports your multiport valve has, its colour and what size the pipework is going to the valve. Your valve will typically either have 1.5" or 2" inlets and outlets, and it will most likely be black or white.

Once you've found the manufactures code, inlet/outlet size, colour and amount of ports you can then go to our site and match your measurements up to one of the many multiport valves we sell.

If you still can't find a valve on our site which is bespoke to yours please feel free to email us on info@poolandspacentre.co.uk and we'll be happy to help you further.

Categories: Pool Filters
Need Help?