SKU
16622

Zeoclere Filter Media 20KG - 30 Filter Media

£45.36 £37.80
6 In stock
A Zeolitic filter media that gives years of service along with water clarity 60% better than sand.
- +
Add to Wishlist

In-stock orders dispatched:14:00

A zeolitic filter media that gives years of service along with water clarity 60% better than sand.

Zeoclere 30 is a granular filter media most commonly used for the reduction of ammonia from water supplies. The grade described on this sheet is Zeoclere 30, which is available in >1-2mm, 0.5-1mm grain size and 0.8-1.24mm.

Zeoclere is a selected high-grade zeolitic mineral from the family of 40 different types? The Zeoclere range is specifically for use in swimming pool pressure or gravity filters. It has a purity of between 80-85% and is constant between these percentages. The material has been shown to operate well in both small and large pressure vessels. In tests carried out using a 1 metre column with the flow in a constant backwash mode for 180 days (24 hours), showed a material loss of 23mm due to attrition. Its clear up rate in new installations has been shown to be faster than that of silica sand and with a improved turbidity of 60% over that of accepted sand.

The average ammonia collection for this grade is 2.88g/lt. This can vary dependent on flow rate. Other advantages of Zeoclere are wide temperature performance along with high removal efficiency including iron/zinc/lead/ copper & silver removal. Because of the high reduction of ammonia removal, the use of chlorine is similarly reduced and on average is quoted that up to 40% savings have been achieved. Zeoclere has a far greater (400%) surface area than silica sand or glass media.
Therefore, backwashing (where appropriate) can be dramatically reduced, saving many thousands of gallons of water, chemicals and heated water to waste.

  • Under correct conditions chemical reduction will be achieved along with water saving, power cost and less maintenance.
  • High ammonia removal (average 2.8gm/lt.) Dependent on flow rate.
  • Ion removal efficiency is high. Far greater surface area than sand.
  • Removes odour. Longevity 5 - 7 years.
  • Turbidity shown to be up to 60% better than accepted silica sand standard and glass media
  • Reduced backwashing by up to 70% over that of sand - saving water and energy.
  • No health hazard.
  • Zeoclere has a far greater (400%) surface area than silica sand or glass. Therefore, backwashing - where appropriate - can be dramatically reduced.
  • Because of the high reduction of ammonia removal, the use of chlorine is similarly reduced and on average is quoted that up to 40% savings have been achieved.

Ideal for domestic pools as well more commercial applications: leisure centres, schools, hydrotherapy, hotel pools and spas.

More from Unbranded
Need Help?