Caldera Advent Eagle Control Box

This is the Advent Eagle control box - 50hz - for Caldera Spas.

This Control Box must be programmed with the correct software code for your spa via a portable USB Drive (Not Included).

Software Jumpers will need to be Configured via the Control Panel.

If you retrofit this control box you may also require the SpaGlo Controller Eagle Retrofit - 78864. Please refer to the associated documents. Contact us for further advice prior to ordering to ensure you are ordering the correct items for your spa.

IMPORTANT INFORMATION:
Circuit boards and other computerised equipment are exempt from our returns policy if they have been opened or installed.
If the board is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.