Dimension One Spas® Mini VCR Jet Body with 3/4" Barb - 01510-585

Hot Tub Jet Body Assembly with 3/8 barbed inlet for air & 3/4" barbed inlet for water - this assembly suits Dimension One Spas® Mini VCR Jet and both Pentair 3 inch and 3 1/3" jets.

Please note these bodies are supplied with the floating compensation ring, situated between the front face and the location nut - (normally with DIMENSION ONE SPAS® Hot tubs) - this is shown in the photo gallery - however with Arctic spas this is not required - please remove prior to installation.

Height: 95 mm (approx. standing on face)
Front Face Diameter: 69 mm

Old Arctic and DIMENSION ONE SPAS® hot tubs