JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Call Us: 01746 330950
01746 330950Contact us on: 01746 330950
In-stock orders dispatched:14:00
Approximate diameter across the bottom thread is 49mm
In accordance with Health and Safety Guidelines (HSG282), a domestic hot tub used in rented accommodation including holiday lets, homes, parks, lodges, chalets, cottages, caravans, etc should be disinfected using Bromine or Chlorine through the use of an inline continuous disinfection feeder.
This filter has a removable top for the SaniStream dosing dispenser to be inserted and locked into position.
The design allows easy access for inspection, refill or replacement while keeping it locked away out of sight of consumers using the spa.
Please Note: The SaniStream dispenser is not included with the filter and must be purchased separately.
We would recommend using Rock Water Air Chlorine Tablets or Bromine Tablets with this SaniStream compatible filter.
Please note: Although the Sanistream dispenser is designed to be used with either Chlorine and Bromine tablets, you may find Chlorine tablets to dissolve at a much quicker rate. To try to avoid this happening ensure your filtration cycle is reduced to no more than 4 hours per 24 hours.
Also, some further information to bear in mind is Chlorine is acidic and lowers the Ph value of the water. When the pH value of the water gets low it has a multiplying effect on the acidity and can have a melting effect on the Polyurethane plastic in the top and base of the filter. Therefore it is important you balance all your chemicals correctly and test levels regularly.
This filter is known to fit some / all spa models from the following manufacturers. Always compare the dimensions of your filter against the dimensions listed.
If replacing an old Pleatco brand threaded filter cartridge, be aware that these have a removable male pipe thread fitting which slip-fits into a hole in the bottom of the filter. You may need to unscrew the pipe fitting from your spa's filter housing if it did not come out with the old filter (many spa owners are not even aware that the fitting is still in there) before you can screw in your new filter.
The filters that we sell are moulded as a single piece, so that the threaded fitting always comes out of the spa with the filter. Please contact us if you require a filter with a detachable boss.
Starting at £8.40 £7.00
Starting at £20.80 £17.33
Starting at £22.84 £19.03
Starting at £15.80 £13.17
Max file size: 8 Mb
Follow us on