Hydroquip 2kw heater - 26-0070C
In-stock orders dispatched: in 9hrs 6mins
This unit is the original Hydroquip's 2Kw heater which excludes the pressure switch. This is completely compatible with your old-style heater
if you need the 2-inch gasket seals and 2-inch collars. then please purchase them separately.
The sticker will say - 26-0070C, you may have another number that we can cross ref. as numerous manufacturers like Thermcore, Gecko & RMF also make this heater
- Length: 13.5 inches
- Diameter: 2 inches
- Distance Between terminals: 1.25 inches
- Plumbing Connections: 2"
- KW: 2
- Amps: 8.3
- Volts: 230
- Hz: 50
Gulf Coast, Coyote Spas, Hotspot, LA Spas, Sierra Spas, Southwest Spas & Sunrise Spas.
When connecting the heater power wires to your new heater terminals hold the base of the terminal with a spanner or long nose pliers before tightening the two 10mm nuts on top, this removes the potential of splitting the terminal seal and voiding your warranty.
