SKU
G9092

Rising Dragon 3-1/3" Pepper Leaf Single Pulse Internal Jet

3-1/3" Single Pulse Pepper Leaf Jet - Thread-in - see inside for full details
Grouped product items
Product Name SKU MPN Price Stock
3" Pepper Leaf Single Pulse Internal Jet 3" Pepper Leaf Single Pulse Internal Jet 31424 RD203-3110
£4.92 £4.10
Out of stock

In-stock orders dispatched:14:00

This is a Rising Dragon 3-1/3" Pepper Leaf Face Jet, with Thread-In diffuser (screw-in). It is two tone with a Single Pulse internal. Also available with a stainless steel face.

Handy Tip!!

Did you know that when it comes to replacing your hot tub jets the front face is not the key identification factor? Many don't and this often leads to incorrect purchases. Here's what to do;

1.Take a look on the back of your current jet (focusing on the plastic diffuser) are there any codes? If yes, pop this code into the search bar on our website PoolandSpaCentre
2. No code, not to worry, simply measure your diffuser. Here's a little guide on what to do Jet Identification

3.Now we’ve identified your diffuser. Let's get the aesthetics right, measure the front face of your current jet. All our jets our conveniently listed by size to help you along the way. Spa Jets

Essentially, THE DIFFUSER MATTERS THE MOST! Once the diffuser is identified ANY jet with that diffuser will fit. Now is just your time to choose colour and style!!

Please note Waterway are slowly discontinuing their push fit jets and the thread in versions are not compaitable, this means there is limited choice available for the cluster storm, mini storm, poly storm & power storm push fit jet range. But as we have learned above this is for aesthetics only.

If you are still struggling please drop us a message with a picture of your jet and the measurements you have gained as per above.

Diameter: 84mm
Height: 96mm

This is the screw in version. You can adapt your existing push-in jet body to fit these jets by fitting the Jet Insert Ring

These Jets have a threaded diffuser to enable the jet to be screwed into the jet body. Please check your existing jet to ensure you have the threaded version and not the clip-in version with 2 locating diffuser clips

The diffuser has RD203-3012/13 or RD203-3011/12 on it for identification and has RD201-3031/32 on the back of the jet face

Need Help?