Spa Fix A Leak

Grouped product items
Product Name	SKU	MPN	Price	Qty	Stock
Spa Fix A Leak - 8oz	Spa Fix A Leak - 8oz	26184	8-05-0061	£14.10 £11.75	- +	80 In stock
Spa Fix A Leak - 32oz	Spa Fix A Leak - 32oz	875	8-05-0073	£39.19 £32.66	- +	93 In stock

Add to Wishlist

In-stock orders dispatched:14:00

FIX A LEAK is a blended, concentrated material designed to seal leaks in virtually any material.

*Shake Well Before Using*

For Spas:

Bypass Filter before adding FIX-A-LEAK to water.
With pump running add FIX-A-LEAK slowly through skimmer or in front of any other suction intake.
FIX-A-LEAK is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension every 4-6 hrs. during circulation of water.
Continue to recirculate water until the leak has stopped.
After the leak has stopped, give it the proper time to cure (24-48 hrs.). You may then return to normal filtration.
Treatment can be repeated if necessary.
Once you determine the leak has stopped, drain your tub. Properly wipe down the spa with a wet cloth, nothing abrasive. Allow to dry for 4-5 days to all FIX A LEAK to properly cure.

For Swimming Pools

Bypass FILTER MEDIA before adding FIX-A-LEAK to water. Sand filters: set filter valve to recirculate. Other types: remove cartridges DE elements from filter tank. Then proceed to circulate through empty tank.
With pump running, add FIX-A-LEAK slowly through skimmer or in front of any other suction intake.
After adding FIX-A-LEAK adjust suction to main drain. If this is not possible, the vacuum cleaner could be used alternatively, simply by placing the vacuum in deepest part of pool and connect to normal vacuum connection. Set filter valve to normal vacuum position.
FIX-A-LEAK is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension, either manually using a pool broom or mechnically with a automated pool cleaner every 4-6 hrs. during circulation of water.
Continue to recirculate water until the leak has stopped.
Mark level of water in pool and check for 2-3 days to determine if the leak has stopped.
After the leak has stopped and given the proper time to cure (24-48 hrs.) you may return to normal filtration. Sand Filters: Set filter valve to filter and resume normal operation. Backwash out unused FIX-A-LEAK as required. Other Types: Reinstall filter into tank and resume operation. Rinse out unsed FIX-A-LEAK from filter as required.
*NOTE* Never let cartridges of DE elements be left to dry before they are cleaned.
Treatment can be repeated if necessary.