Vita Spa PCB - 460127

This is a Vita Spas PCB known as a 460127, used on Spas between 2000 to 2006.

It operates either a 1 or 2 pumps system with or without a blower, with a circ and a light.

Settings are configured via the buttons on the display.

Please Note - there is a very similar PCB that is code 460100 listed seperately

This hot tub circuit board must only be fitted to the hot tub control system specified, it should be fitted by a competent individual as all our boards are tested prior to sending out, so we recommend you read our easy to understand PCB installation notes in our troubleshooting section.

IMPORTANT INFORMATION:

Circuit boards and other computerised equipment are exempt from our returns policy if they have been opened or installed.

If the board is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.