Vita Spa PCB - Control for ICS Pack

This is the small red PCB - Code DM#0454006-D and 0454002-X used in the ICS pack. This replacement board comes without the battery as it is not required anymore.

It slots into the main Relay / Mother Board - Vita Spas PCB - Relay for ICS Pack (Dream)

12cm x 7cm

Vita Spas , Reflections Spas and Tranquility Spas between 2006 and 2009.

When you install the board you may need to reconfigure the spa settings as the new board may be set to different settings to the old board. IE 1, 2 or 3 pumps. This is done through the Topside control panel.

This hot tub circuit board must only be fitted to the hot tub control system specified, it should be fitted by a competent individual as all our boards are tested prior to sending out, so we recommend you read our easy to understand PCB installation notes in our troubleshooting section.

IMPORTANT INFORMATION:

Circuit boards and other computerised equipment are exempt from our returns policy if they have been opened or installed.

If the board is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.