SKU
37410
229-7607

Waterway 5" Power Storm Rotational Jet - Threaded

£18.28 £15.23
2 In stock
Waterway 5" Power Storm Rotational Jet - Threaded
229-7607
- +
Add to Wishlist

In-stock orders dispatched:14:00

This is a screw in version of the Waterway Power Storm Rotational jet which has a threaded diffuser on the back. It has a grey textured plastic face with a 5 scallop finish. It is only compatible with Power Storm threaded jet body.

Please check the back of your existing jet to ensure you have this screw-in version. If your jet clips into the jet body you will require the Waterway 5" Directional Power Storm Clip in Jet.

Handy Tip!!

Did you know that when it comes to replacing your hot tub jets the front face is not the key identification factor? Many don't and this often leads to incorrect purchases. Here's what to do;

1.Take a look on the back of your current jet (focusing on the plastic diffuser) are there any codes? If yes, pop this code into the search bar on our website PoolandSpaCentre
2. No code, not to worry, simply measure your diffuser. Here's a little guide on what to do Jet Identification

3.Now we’ve identified your diffuser. Let's get the aesthetics right, measure the front face of your current jet. All our jets our conveniently listed by size to help you along the way. Spa Jets

Essentially, THE DIFFUSER MATTERS THE MOST! Once the diffuser is identified ANY jet with that diffuser will fit. Now is just your time to choose colour and style!!

Please note Waterway are slowly discontinuing their push fit jets and the thread in versions are not compatible, this means there is limited choice available for the cluster storm, mini storm, poly storm & power storm push fit jet range. But as we have learned above this is for aesthetics only.

If you are still struggling please drop us a message with a picture of your jet and the measurements you have gained as per above.

Diameter: 127mm
Height: 140mm

This Jet screws into the Waterway Threaded Power Storm Jet Body.

More from Waterway
Need Help?