Waterway Directional Cluster Storm Jet - Sterling Silver 2"

This Waterway Cluster Storm Jet is extremely common in the UK and Europe, it is easily identified as it has a centre nozzle (10mm), moveable to your choice of position and a 5 point scallop textured face. Available in Sterling Silver. This is a very light grey in colour as shown in the image

Handy Tip!!

Did you know that when it comes to replacing your hot tub jets the front face is not the key identification factor? Many don't and this often leads to incorrect purchases. Here's what to do;

1.Take a look on the back of your current jet (focusing on the plastic diffuser) are there any codes? If yes, pop this code into the search bar on our website PoolandSpaCentre
2. No code, not to worry, simply measure your diffuser. Here's a little guide on what to do Jet Identification

3.Now we’ve identified your diffuser. Let's get the aesthetics right, measure the front face of your current jet. All our jets our conveniently listed by size to help you along the way. Spa Jets

Essentially, THE DIFFUSER MATTERS THE MOST! Once the diffuser is identified ANY jet with that diffuser will fit. Now is just your time to choose colour and style!!

Please note Waterway are slowly discontinuing their push fit jets and the thread in versions are not compaitable, this means there is limited choice available for the cluster storm, mini storm, poly storm & power storm push fit jet range. But as we have learned above this is for aesthetics only.

If you are still struggling please drop us a message with a picture of your jet and the measurements you have gained as per above.

Diameter: 50mm
Height: 75mm

A huge variety of tubs, some are Aegean, Spaform tubs including Grand Canyon, Milano, Odyssey, Oslo, Platinum, Tango & Utopia, amongst others. Also a replacement for the Beachcomber jets with the ring face design which have now been discontinued.

This jet fits the cluster storm jet body using push fit connection, when fitting or removing always be vigilant not to impart to much pressure on the jet as it is only fixed in by 2 plastic lugs which over time become brittle - simply push in and turn clockwise.

As of January 2018, Waterway will be discontinuing all clip-in storm jets with the exception of the five scalloped series directional jets in Sterling Silver only. These are interchangeable with any other Waterway Clusterstorm clip-in jet.

A Waterway jet is made up of a front face & a diffuser (rear piece). This jet has the number 218-5140 found on the diffuser. Don't worry some jets don't have this code or it may have worn away or the plastic may have a build up of scale, take a moment and scratch with your finger nail to see if you can reveal the code. Always marry this number up with the diameter of the jet front face.