Blue Horizons Commercial Super Cleanse (50x20g)

Warm swimming pool and spa water provide the perfect conditions for bacterial growth. As bacteria begins to form on surfaces, in pipework and balance tanks, biofilm can start to form. Biofilm is extremely resistant to chlorine and usually can’t be burnt off with your daily sanitisers, even shock treating won’t remove hard formed biofilms.

Biofilm begins with a small number of bacteria that attach themselves to a solid surface. As the bacteria continues to aggregate on the surface,they begin to change and develop into a complex colony protected by a layer of slime – this sticky layer is the biofilm.

If left untreated, in addition to making the water potentially unsafe for bathers, biofilm can make the water cloudy or foamy and it may also cause an unpleasant odour.

Blue Horizons Commercial Super Cleanse Tablets, when added to water, produce chlorine dioxide, a highly effective cleaning agent that is strong enough to penetrate the toughest of biofilms and helps remove the bacteria.

• Powerful biofilm remover
• Supplied in tablet for easyapplication
• Keeps spa internals and balance tanks clean and bacteria free
• 1kg commercial pack size (50x 20g tablets)
• Can be used as an effective way of ensuring swimming aids and floats remain clean and bacteria free

1. Isolate your chlorine, redox & pH probes from the pool or spa water.
2. Isolate any chlorine or bromine feeder prior to product application.
3. For systems with a cartridge filter, remove & clean the cartridge, then return to
   service before treatment starts.
4. CAUTION: Do not use the pool or spa during Super Cleanse treatment.
5. Refer to table below for number of tablets required for treatment.
6. Wear suitable protective gloves & eye protection when handling product.
7. Use scissors to cut open the sachet(s) and carefully drop the required number of
   tablets around the pool or spa perimeter with the pump(s) running.
8. After 15 – 20 minutes, backwash your filter. The pool or spa will be safe to use
   after 8 hours.

Other Applications

To clean a biofilm covered surface such as floatation aids, covers, channel grates or around the pool side and in changing areas, use the following dose rate:

1. Add one tablet to 20ltr of water (using a clean bucket) and allow the tablet to fully dissolve.
2. Apply the solution to the surface to be cleaned, leave for 5 minutes and then wash off with clean water.