SKU
G2199

SpaQuip / Davey QB series pumps

The Davey Spaquip QB series pumps offers robust design in both single and two speeds at varying horsepowers
Grouped product items
Product Name SKU MPN Price Qty Stock
Two speed 2hp (QB2502-AMP) Two speed 2hp (QB2502-AMP) 14336 QB2502-AMP
£635.30 £529.42
- +
Available for
Back Order
Add to Wishlist

In-stock orders dispatched:14:00

This is the rebranded Davey booster pump from SpaQuip.

It comes with 2" unions on the inlet/outlet. Now branded as Davey Spa.

Not sure which pump you need?
 
Below is a breakdown of what to check. First will be AMPs and RPMs.
  • If there is only one rating then it will be a single speed, if there is two, you guessed it ... two speed.
  • AMP ratings will typically be 5 – 7 amps = 1.5 (HP), 7–9 amps = 2.0 (HP), 9–11 amps = 2.5 (HP), 11–12 amps = 3.0(HP) & 14–15 amps = 4.0 (HP)
  • RPM rating will normally be 1450 for low speed and 2900 for high speed.
Next, check the outside diameter's of the threads for your pipe connections.
 
 

Most wet ends can be rotated to 3, 9 and 12 o'clock so no need to worry about that.

It is worth checking overall dimensions of the pump before ordering to ensure you have enough space for the new pump.

Now you have all the information to look through our Jet Pump Range!

The QB Series spa pool booster pump offers powerful pump performance. Suitable for spa pools and swim spas, the robust pump design combined with powerful motor options delivers high performance but at relatively low noise levels due to its large suction and discharge outlets.

Design of the QB incorporates a 316SS, corrosion resistant stainless steel pump shaft to ensure years of troublefree use, even in salt water spa pool applications, for an extended pump life. The shielded yoke design helps protect the motor from any adverse leaking from the wet end whilst still meeting all industry safety standards.

The QB range includes single and two speed models allowing for the lower speed to be used to help conserve energy during filtration cycles. Use of AMP plugs are standard.

The pump housing can be turned 180° for easy installation of pipework, horizontal or vertical offering flexibility with installation for both new and retrofit applications.

This is the most common pump in the UK & Europe for Rotospa pumps.

Hot tub spa pump

The LX LP and WP pumps can be used as a cheaper alternative to the Davey pumps listed here. However, it is important to note that the existing pump unions will need to be replaced with the ones supplied when choosing an LX pump.

Need Help?