Aqua-flo Impellor - 1hp Hi Flo
In-stock orders dispatched: in 1hrs 51mins
This is a Aqua-Flo Impeller - part number 91693601 - 1HP Hi Flo. Supplied without seals & wears rings.
We always recommend when replacing the impeller you also replace the Aquaflo Seal
Please note this is extremely similar to the Aqua-flo 3/4 HP Impellor version (91693551) also sold in our shop - the only difference is a slight power decrease and the vein distance so do not worry if you pick the wrong one.
As a guide to help you if you cannot locate the horsepower please look at the below:
Diameter: 95 mm
Height: 91 mm
Intake outer diameter: 44 mm
Front and rear vein distance: 6.5 mm
Aquaflo Circmaster Pumps CMHP & CMCP & Flomaster pump FMCP & FMHP.
You can identify this impellor by a orange dot at the impellor shaft.