HydroAir Heater 1.5 kW w/high limit

Hydroair Heater 1.5 kW

Material: Stainless steel body, incoloy element

V/Hz: 240V/50-60Hz

Note: With high-limit and fixed thermostat at 40 degree Celsius

This heater is available in both vacuum and pressure switch versions. To identify which heater you require you will need to check your current set up to see where the heater is located. If the heater is located before the pump inlet you will require the vacuum switch version. If it is located after the pump outlet, it will be the pressure switch version. Further information on these heaters can be found in the heater manual located in the download section above.

These items are usually in stock, however, if not you will be informed and delivery may take 2-3 weeks.